Why a pump to move molten metal is awesome
The conversion of one form of energy into another is more efficient at higher temperatures.1 For example, one of the most widely used components of any system that involves the transfer of heat from one part of the system to another is a device called a heat exchanger. When it's transferring heat from one fluid to another, for example, the heat exchanger must facilitate the efficient movement of heat between the two media without allowing them to mix.
There are many designs of heat exchangers for a variety of applications but the basic principle is the same. However, they're all limited by the explicit condition that entropy – "the measure of disorder" – is higher at lower temperatures. In other words, the lower the temperature difference within the exchanger, the less efficiently the transfer will happen. This is why it's desirable to have a medium that can carry a lot of heat per unit volume.
But this is not always possible for two reasons. First: there must exist a pump that can move such a hot medium from one point to another in the system. This pump must be made of materials that can withstand high temperatures during operation as well as not react with the medium at those temperatures. Second: one of the more efficient media that can carry a lot of heat is liquid metals. But they're difficult to pump because of their corrosive nature and high density. Both reasons together, this is why medium temperatures have been limited to around 1,000º C.
Now, an invention by engineers from the US has proposed a solution. They've constructed a pump using ceramics. This is really interesting because ceramics have a good reputation for being able to withstand extreme heat (they were part of the US Space Shuttle's heat shield exposed during atmospheric reentry) but an equally bad reputation for being very brittle.2 So this means that a ceramic composition of the pump material accords it a natural ability to withstand heat.
In other words, the bigger problem the engineers would've solved for would be to keep it from breaking during operation.
Their system consists of a motor, a gearbox, pipes and a reservoir of liquid tin. When the motor is turned on, the pump receives liquid tin from the bottom of the reservoir. Two interlocking gears inside the pump rotate. As the tin flows between the blades, it is compressed into the space between them, creating a pressure difference that sucks in more tin from the reservoir. After the tin moves through the blades, it is let out into another pipe that takes it back to the reservoir.
